APP 1K S Fine-Grain Smoothing Putty 100 g

APP 1K S is a fine-grain one-component smoothing putty designed for filling very small surface defects, scratches, pores and uneven areas before further painting or coating work. It is a quick repair putty used where a thick layer of 2K polyester putty is not required and only small local imperfections need to be levelled.

APP 1K S is especially suitable for small body repair work: minor scratches, stone chip damage, pores after filling, small primer imperfections and local surface touch-ups. The convenient 100 g tube makes it easy to dose the required amount, making the product suitable for both professional workshops and small garage repairs.

As a 1K putty, it does not need to be mixed with hardener. The product is applied in a thin layer with a spreader onto a clean, dry, degreased and properly abraded surface. Its fine structure helps achieve a smoother surface before priming, painting or clear coating. Thick layers are not recommended — this product is intended for small surface corrections, not for filling deeper dents.

APP 1K S is suitable for automotive body repair, plastic part preparation, small defect removal, paint preparation work and quick local surface levelling. It is a practical product when small pores, scratches or uneven areas remain after sanding or priming and need to be removed quickly and precisely.

Application:

Filling small surface defects
Levelling scratches and pores
Touch-up work on primed surfaces
Repairing plastic surfaces
Quick local body repair
Preparation before painting or clear coating
Use in professional workshops and garages

Features:

Manufacturer: APP
Model: APP 1K S
Type: one-component fine-grain smoothing putty
Quantity: 100 g / 0.10 kg
Packaging: tube
No hardener required
Designed for very small defects and scratches
Elastic, suitable for plastic surfaces
Does not leave pores
Can be coated with acrylic topcoats
Convenient for quick and local repairs

Use recommendations:

Clean, degrease and abrade the surface.
Use only on a dry and properly prepared surface.
Squeeze the required amount of putty from the tube.
Apply in a thin layer with a spreader.
Do not use for deep dents or thick layers.
After drying, sand according to the requirements of the next painting stage.
Before applying paint or clear coat, follow the manufacturer’s technical data sheet and paint system recommendations.