CARSYSTEM Easy Mask Polyethylene Masking Film 4 x 150 m

CARSYSTEM Easy Mask is a professional polyethylene masking film roll designed for automotive painting, body repair and masking work. It is a 4 m wide and 150 m long film used to quickly cover large areas and protect them from overspray, dust, dirt, moisture and other contamination during work.

CARSYSTEM masking products are designed to quickly and efficiently protect the working area from moisture, dirt and overspray. Masking films are supplied in rolls and can be cut as needed, helping reduce material waste.

Easy Mask film is a practical solution when a vehicle body, windows, wheels, interior, adjacent panels or large work areas need to be covered quickly before priming, painting or clear coating. The film helps prevent overspray from reaching unwanted surfaces and allows cleaner work.

The 4 m width allows large vehicle areas to be covered conveniently, while the 150 m roll is an economical choice for professional paint shops, car repair shops and body repair areas. The film can be used together with masking tapes, masking paper, film cutters and special film dispensers.

Polyethylene film is lightweight, flexible and easy to shape around vehicle body lines. It helps quickly isolate repair areas, protect surfaces that are not being worked on and reduce cleaning work after painting. When properly fixed, the film stays in place and allows the part to be prepared accurately for painting.

The masking film is especially useful during painting and clear coating, when vehicle parts need to be protected from sprayed materials. It is also suitable for sanding, priming, polishing preparation, part protection and general workshop masking work.

Before use, surfaces should be clean, dry and degreased so that masking tape adheres well to the edges. The film should be spread over the protected area, adjusted to the shape of the vehicle or part and fixed with suitable masking tape. If the film is used for painting work, it is important to ensure that it is properly stretched and does not enter the freshly painted area.

CARSYSTEM Easy Mask 4 x 150 m film is intended for professional use in paint shops, body repair workshops, car repair shops and other places where large surfaces need to be protected quickly, cleanly and reliably.

Application:

Masking vehicles before painting
Body repair work
Protecting painting and clear coating areas
Protection from overspray
Protection from dust, dirt and moisture
Covering windows, wheels, interior and adjacent parts
Priming and paint preparation work
Covering large surfaces
Use with masking tapes
Professional use in paint shops and car repair shops

Features:

Manufacturer: CARSYSTEM
Product: Easy Mask
Type: polyethylene masking film roll
Dimensions: 4 x 150 m
Width: 4 m
Length: 150 m
Material: polyethylene
Use: masking and surface protection
Packaging: roll
Designed for covering large surfaces
Protects from overspray, dust, dirt and moisture
Easy to cut as needed
Convenient to use with masking tape
Suitable for painting, priming and clear coating work
Suitable for professional use
Helps reduce cleaning work after painting

Use recommendations:

Before masking, clean the surface from dust, dirt, grease and silicone residue.
Unroll the required film length according to the area to be protected.
Adjust the film to the shape of the vehicle or part.
Fix the edges with suitable masking tape.
Cut the film with a special film cutter or another suitable tool.
Make sure the film does not enter the painting area.
Avoid loose hanging film edges during painting.
After work, remove the film carefully so overspray does not reach clean surfaces.
Use according to the selected painting and masking system recommendations.
When working with paints, primers or clear coats, use suitable personal protective equipment.