CONCEPT JET Black Gloss Black NANO Carnauba Wax 1 L

CONCEPT JET Black Gloss Black NANO Carnauba Wax 1 L is a wax-polish specially developed for black painted surfaces, designed to quickly restore gloss, improve surface appearance and provide an additional protective effect.

Black vehicles look their best only when the surface is clean, glossy and visually smooth. However, fine holograms, swirl marks, light polishing traces and uneven gloss are very visible on black paint. CONCEPT JET Black Gloss helps quickly improve the appearance of such surfaces by masking or reducing the visibility of minor defects.

The product is designed as a black NANO Carnauba Wax Polish. Its formula combines carnauba wax, non-staining components, colour-enhancing additives and NANO technology. This helps give the surface a richer black tone, deeper gloss and a “wet look” effect.

The NANO “Lotus-leaf” effect helps the product bond to the painted surface, repel water, reduce dirt build-up and make future washing easier. The surface becomes slicker, easier to maintain and visually cleaner.

CONCEPT JET Black Gloss is suitable for all modern paint systems, including HS and Ceramic Clear Coat finishes. It can be used on both older and newer painted vehicle surfaces when quick gloss improvement and better overall appearance are needed.

A major advantage is that the product does not cause common staining problems on black plastic or rubber trim. Unlike some traditional polishing products or waxes that can leave white marks on plastics, JET Black Gloss can be used near black plastics and rubber without additional masking.

The product is easy to use: apply to a clean, cool surface, allow a light haze to form and buff with a microfiber cloth to full gloss. The low-dusting formula helps avoid excessive dust during work.

The 1 L size is convenient for professional use in detailing centres, car washes, service centres and vehicle preparation work, as well as for users who regularly maintain black vehicles.

Main features:

CONCEPT JET Black Gloss

Black NANO Carnauba wax

Wax-polish for black painted surfaces

Capacity 1 L

Product code 44201

Designed for black vehicles

Restores deep gloss

Enhances black colour

Helps mask fine holograms

Helps reduce the visibility of swirl marks

Helps improve the appearance of problematic black paint

Provides a “wet look” effect

NANO “Lotus-leaf” effect

Helps repel water

Helps reduce dirt adhesion

Makes future surface maintenance easier

Suitable for modern paint systems

Suitable for HS clear coats

Suitable for Ceramic Clear Coat finishes

Safe to use near black plastics

Safe to use near rubber parts

No extra masking needed to avoid white marks

Easy to apply

Easy to buff off

Low-dusting formula

Water-based formula

Free from aromatic solvents

Suitable for professional and household use

Technical data:

Manufacturer: Concept Chemicals

Product name: JET Black Gloss

Product type: black NANO Carnauba wax-polish

Capacity: 1 L

Product code: 44201

Purpose: gloss, colour depth and protective effect for black painted surfaces

Formula: carnauba wax emulsion, NANO technology, non-volatile silicones, polishing additives, colour-enhancing components

Appearance: black viscous liquid

pH: 8.5

Fragrance: wax

Surfaces: black painted vehicle surfaces, modern paint systems, HS clear coats, Ceramic Clear Coat finishes

Use: by hand with a soft polishing cloth or applicator

Storage: protect from freezing, store at room temperature

Shelf life: at least 18 months in unopened packaging

Use:

Shake well before use. The surface must be clean, dry, cool and not heated by the sun.

Apply a small amount of CONCEPT JET Black Gloss to a soft polishing cloth or applicator. Spread the product in a thin and even layer over the black painted surface.

Allow the product to dry briefly until a light haze forms. Then buff the surface with a clean microfiber polishing cloth to full gloss.

Work in small sections and do not use too much product. A thin layer wipes off more easily and helps achieve a cleaner, more even gloss.

Note:

Do not use in direct sunlight or on a hot surface. Before use on sensitive, repainted or unknown surfaces, it is recommended to test in a less visible area. Use only clean microfiber cloths and applicators to avoid damaging the clear coat.