EPOCA Pumping System for 5–10 L Pressure Sprayers

EPOCA pumping system for 5–10 L pressure sprayers is an original EPOCA spare part designed for repair, maintenance or replacement of a worn pumping system in 5 L, 7 L and 10 L pressure sprayers.

The pumping system is one of the most important parts of a pump-up sprayer. It is used to create pressure inside the tank so the sprayer can evenly spray chemicals, cleaning agents, washing liquids or other compatible liquids.

This part is suitable for EPOCA 5–10 L pressure sprayers. It can be used when the old pump is difficult to move, no longer builds pressure, leaks air, sticks, is mechanically damaged or no longer ensures comfortable sprayer operation.

The manufacturer states that the pumping system uses a PP cylinder and PP piston. This is a spare part designed for EPOCA pressure sprayers when you want to extend the service life of the sprayer without replacing the entire unit.

Versions are available according to seal type: NBR, EPDM and VITON. It is important to choose the correct version according to the specific sprayer model and the chemical being used.

Seal type selection:

NBR – often used with oils, greases and some solvent-based products, but compatibility must always be checked according to the chemical used.

EPDM – often used with alkaline and some acidic products, but not suitable for all chemicals.

VITON – designed for higher chemical resistance requirements, especially when using more aggressive chemicals, but compatibility must still be checked.

Product codes by version:

7808.Z001 – NBR

7808.Z201 – EPDM

7808.Z101 – VITON

Technical data:

Manufacturer: EPOCA

Product type: pumping system / spare pump for sprayer

Purpose: spare part for pressure sprayers

Suitable for: EPOCA 5 L, 7 L and 10 L pressure sprayers

Main code: 7808

Cylinder: PP

Piston: PP

Packaging: bag with label

Available versions: NBR, EPDM, VITON

Function: creating pressure inside the sprayer tank

Main features:

Original EPOCA spare part

Pump for 5–10 L sprayers

Suitable for 5 L, 7 L and 10 L pressure sprayers

Designed to create pressure

Suitable for sprayer repair

Suitable for replacing a worn pump

Helps restore sprayer operation

PP cylinder

PP piston

NBR, EPDM and VITON versions available

Important to choose according to the chemical used

Suitable for professional and household use

Suitable for car washes, service centres, detailing work and workshops

Use:

Before replacing the pump, fully release the pressure from the sprayer and empty the tank. Remove the old pumping system according to the sprayer construction and install the new EPOCA pump.

After replacement, it is recommended to check whether the pump moves smoothly, whether the sprayer builds pressure and whether there is any air or liquid leakage. If the sprayer is used with chemicals, make sure the selected pump / seal version is compatible with the product being used before operation.

Note:

Before ordering, check compatibility with the specific EPOCA sprayer model and the chemical being used. Different NBR, EPDM and VITON versions may be intended for different chemicals, so an incorrectly selected version may wear out faster or fail to provide proper sealing.