Flexipads Cyclone HARD ventilated sanding pad 150 mm, 53 holes

Flexipads Cyclone HARD ventilated sanding pad 150 mm, 53 holes is a professional backing pad designed for use with orbital sanding machines and 150 mm sanding discs. The Cyclone construction with 53 holes and additional ventilation channels is designed for efficient dust extraction, making the pad suitable for body preparation, filler sanding, primer sanding, clear coat sanding and painted surface sanding.

The abrasive size is 150 mm, the surface is Micro GRIP, the hole system is 53 holes with ventilation channels, the thread is 5/16 + M8, the foam layer is 10 mm, the density is Hard, and the maximum speed is 12,000 RPM. The Cyclone plate construction helps create strong suction in the upper pad chamber and optimises dust extraction during sanding.

The 53-hole system helps remove sanding dust effectively from the working surface, keeping the area cleaner and allowing the sanding disc to work more evenly. This is especially useful when working with mesh abrasives or multi-hole sanding discs, where efficient dust extraction across the full pad surface is important.

The hard 10 mm foam layer provides more stability and more precise surface control during sanding. The HARD density pad is especially suitable for flatter surfaces and jobs where a firmer base, less pad deformation and more aggressive controlled sanding are required.

Flexipads Cyclone HARD 150 mm is a practical choice for professional body repair workshops, paint preparation work, detailing studios and workshops where cleaner sanding, reliable dust extraction and stable abrasive performance are important.

Features:

• Diameter: 150 mm

• Hole system: 53 holes + ventilation channels

• Surface: Micro GRIP

• Thread: 5/16 + M8

• Foam layer: 10 mm

• Density: Hard

• Maximum speed: 12,000 RPM

• Cyclone construction for efficient dust extraction

• Designed for orbital sanding machines

• Suitable for 150 mm hook-and-loop sanding discs

• Convenient for use with mesh abrasives

• Suitable for body preparation, primer, filler, clear coat and painted surface sanding

Application:
Attach the pad to a compatible orbital sanding machine with 5/16 or M8 fitting. Use 150 mm sanding discs with a suitable hole system or mesh abrasives with GRIP / hook-and-loop attachment. Before use, check that the pad and disc are stable and that the dust extraction system is properly connected. Do not exceed the manufacturer’s maximum speed of 12,000 RPM.