Flexipads Cyclone MEDIUM ventilated sanding pad 125 mm, 44 holes

Flexipads Cyclone MEDIUM ventilated sanding pad 125 mm, 44 holes is a professional backing pad designed for use with orbital sanding machines and 125 mm sanding discs. The Cyclone construction with 44 holes is designed for efficient dust extraction, making the pad suitable for body preparation, filler sanding, primer sanding, clear coat sanding and painted surface sanding.

The abrasive size is 125 mm, the surface is Micro GRIP, the hole system is 44 holes, the thread is 5/16 + M8, the foam layer is 10 mm, the density is Medium, and the maximum speed is 12,000 RPM. The Cyclone design helps optimise dust extraction through each hole and keeps the working area cleaner during sanding.

The 44-hole system helps remove sanding dust more effectively from the working surface, allowing the abrasive disc to work more evenly. This is especially useful when working with mesh abrasives or multi-hole sanding discs, where efficient dust extraction across the entire pad surface is important.

The medium-density 10 mm foam layer provides a good balance between stability and surface adaptation. The pad is suitable for flatter and slightly curved surfaces when controlled sanding and effective dust extraction are required. The 5/16 + M8 thread allows the pad to be used with compatible orbital sanding machines.

Flexipads Cyclone MEDIUM 125 mm is a practical choice for professional body repair workshops, paint preparation work, detailing studios and workshops where cleaner sanding, good abrasive grip and reliable dust extraction are important.

Features:

• Diameter: 125 mm

• Hole system: 44 holes

• Surface: Micro GRIP

• Thread: 5/16 + M8

• Foam layer: 10 mm

• Density: Medium

• Maximum speed: 12,000 RPM

• Cyclone construction for efficient dust extraction

• Designed for orbital sanding machines

• Suitable for 125 mm hook-and-loop sanding discs

• Convenient for use with mesh abrasives

• Suitable for body preparation, primer, filler, clear coat and painted surface sanding

Application:
Attach the pad to a compatible orbital sanding machine with 5/16 or M8 fitting. Use 125 mm sanding discs with a suitable hole system or mesh abrasives with GRIP / hook-and-loop attachment. Before use, check that the pad and disc are stable and that the dust extraction system is properly connected. Do not exceed the manufacturer’s maximum speed of 12,000 RPM.