GOLDCAR Acrylic Spray Primer 500 ml

GOLDCAR acrylic spray primer 500 ml is a convenient aerosol primer designed for quick surface preparation before painting. The spray format allows work without additional painting equipment, making the product especially suitable for small repair jobs, local body preparation, paint defect correction and priming individual parts.

This primer is used when the surface needs to be unified, topcoat adhesion improved and the base prepared for further painting. It can be used in automotive body repair, paint preparation, plastic or metal part work, small repair areas and various surface renovation tasks.

GOLDCAR fast-drying acrylic primer in aerosol form provides very good anti-corrosion properties, very good adhesion to various surfaces, fast drying and good coverage. It is also easy to sand both wet and dry from P400 grit.

Acrylic spray primer is convenient for local repair areas where there is no need to prepare a large amount of mixed product or use a spray gun. It is a practical solution for car repair shops, body repair workshops, paint preparation areas and garage use.

GOLDCAR primer helps cover minor surface unevenness, fill small sanding marks and create a suitable base for paint. Good coverage allows the repaired area to be coated more evenly, while fast drying helps shorten working time.

The product can be used before basecoats, acrylic paints or other suitable topcoats, following the recommendations of the selected paint system. Before use, the surface must be clean, dry, degreased and properly abraded. Dust, grease, silicone, wax, rust and loose old coatings must be removed.

GOLDCAR spray primer 500 ml is a suitable choice for small and medium repair areas when the surface needs to be prepared quickly for the next painting stage. Since this product will have a colour selection, the colour should be chosen in the product variant according to the specific job and the planned topcoat.

Application:

Automotive body repair
Small paint preparation work
Local surface priming
Repair areas after sanding
Surface unifying before painting
Metal and other properly prepared parts
Improving paint adhesion
Filling minor sanding marks
Professional and enthusiast use

Features:

Manufacturer: GOLDCAR
Type: acrylic spray primer
Quantity: 500 ml
Use: aerosol primer
Fast drying
Good coverage
Very good adhesion to various surfaces
Anti-corrosion properties
Easy to sand
Suitable for dry and wet sanding
Recommended sanding from P400
Convenient for local repair work
No spray gun required
Suitable for surface preparation before painting
Colour selected in product variant

Use recommendations:

Clean, degrease and dry the surface.
Remove rust, dust, silicone, wax, grease and loose old coatings.
Abrade the surface with a suitable abrasive according to the task.
Shake the aerosol well before use.
Make a test spray in an inconspicuous area or on a test surface.
Spray in several thin coats, keeping an even distance from the surface.
Allow the primer to flash off between coats according to the technical data sheet.
After drying, sand dry or wet with the appropriate grit.
Before painting, clean the surface again from dust and degrease it.
After use, turn the aerosol upside down and spray briefly to clear the nozzle.
Use according to the product technical data sheet and safety data sheet.