GOLDCAR BUMPER Black Textured Spray Paint for Plastic 500 ml

GOLDCAR BUMPER is a textured spray paint designed for repairing, refreshing and protecting plastic car parts. It is a black spray paint used for bumpers, mouldings, mirror housings, sill trims, interior plastic parts, exterior plastic trims and other elements made of plastic.

GOLDCAR textured paint is based on acrylic and cellulose resins and is intended for painting plastic parts such as bumpers, mouldings, mirrors and other plastic elements. The product dries quickly, is easy to use and in many cases does not require a separate primer for plastic surfaces.

This paint helps quickly and effectively refresh plastic parts that have lost colour, become scratched, faded or have minor surface damage. The sprayed texture allows a more natural plastic surface effect to be achieved, making the paint especially suitable for bumper and exterior plastic trim repairs.

GOLDCAR BUMPER offers short drying time and very good adhesion to many plastic surfaces. The intensity of the texture can be adjusted by spraying distance and layer thickness: a thinner layer gives a softer texture, while a thicker layer creates a more pronounced textured effect.

Textured plastic paint also helps mask minor surface imperfections, small scratches, texture differences or small repair marks. This is convenient when a plastic part needs to be refreshed quickly without replacing it. The created coating can be resistant to cracking if the surface is properly prepared and the paint is used according to the technical data sheet.

Before painting, the surface must be clean, dry, degreased and abraded if required by the condition of the surface. Silicone, wax, grease, dust, dirt and loose old coatings must be removed. The aerosol must be shaken well before use, and the paint should be sprayed in several thin coats while keeping a suitable distance from the surface.

Recommended application temperature is around 15–25 °C. Drying time depends on air temperature, humidity and the thickness of the applied layer, so before fitting or using the part, make sure the coating is fully dry.

GOLDCAR BUMPER 500 ml aerosol is a practical choice for car repair shops, body repair workshops, paint preparation areas, detailing technicians and garage use. The product is suitable for both small local plastic repairs and refreshing larger plastic parts.

Application:

Refreshing plastic car parts
Bumpers and bumper trims
Mouldings and exterior plastic parts
Mirror housings
Sill trims
Interior plastic elements
Hiding minor plastic surface defects
Restoring texture on plastic surfaces
Professional and enthusiast use

Features:

Manufacturer: GOLDCAR
Series: BUMPER
Type: textured spray paint for plastic
Colour: black
Quantity: 500 ml
Index: VKX-300.634-X01
EAN: 5906735807554
Base: acrylic and cellulose resins
Fast drying
Easy to spray
Good adhesion to many plastics
In many cases does not require a separate primer
Creates a fine plastic texture
Helps hide minor surface defects
Texture can be adjusted by layer thickness and spraying distance
Suitable for plastic part renovation
Shelf life: 10 years

Use recommendations:

Clean, degrease and dry the surface thoroughly.
Remove silicone, wax, grease, dust and dirt.
If the surface is very smooth or damaged, lightly abrade it.
Shake the aerosol well before use.
Before painting, it is recommended to make a test spray in an inconspicuous area.
Spray in several thin coats, keeping an even distance from the surface.
Adjust the texture effect by spraying distance and layer thickness.
Use at around 15–25 °C.
Observe the drying time between coats specified in the technical data sheet.
After use, turn the aerosol upside down and spray briefly to clear the nozzle.
Follow the product technical data sheet and safety data sheet.