GoldCar Gloss Black Spray Paint 500 ml

GoldCar Gloss Black Spray Paint 500 ml is a practical acrylic spray paint in an aerosol can, designed for quick and convenient painting, refreshing or minor repair of various surfaces.

This gloss black paint is suitable both for painting larger parts and for smaller repair or finishing work. The aerosol can allows the paint to be applied conveniently without additional painting equipment, making it useful in service centres, body repair workshops, garages and various repair jobs.

GoldCar gloss black spray paint creates an intense black glossy surface finish. When the surface is properly prepared, the paint provides very good coverage, good adhesion and helps give the painted part a clean, uniform and aesthetic appearance.

The paint can be used on metal, aluminium, glass, plastic, wood and other properly prepared surfaces. When painting plastic parts or more difficult surfaces, it is recommended to use a suitable primer or adhesion promoter to ensure better adhesion and longer coating durability.

The product is designed for final painting and provides a protective function. It is a convenient choice for painting automotive parts, tools, structures, decorative elements and other surfaces where a gloss black finish is required.

Main features:

GoldCar gloss black spray paint

Capacity 500 ml

Acrylic spray paint

Black colour

Glossy surface finish

Intense black colour

Very good coverage

Good adhesion to properly prepared surfaces

Fast-drying paint

Convenient application

Suitable for final painting

Suitable for minor repairs

Suitable for refreshing parts

Suitable for metal surfaces

Suitable for aluminium

Suitable for glass

Suitable for plastic when used with a suitable primer

Suitable for wood

Suitable for automotive parts

Suitable for professional and household use

Technical data:

Manufacturer: GoldCar

Product type: acrylic spray paint

Colour: black

Finish: glossy

Capacity: 500 ml

Code: VKX-300.618-X01

EAN: 5906735807493

Shelf life: 10 years

Packaging: aerosol

Purpose: final painting, part refreshing and minor repair

Suitable surfaces: metal, aluminium, glass, plastic, wood and properly prepared surfaces

Use:

Before painting, the surface must be clean, dry, degreased and properly prepared. Remove rust, old paint residues, dust, grease and other contamination.

Shake the aerosol can well before use. Spray the paint in several thin coats from a suitable distance, avoiding applying too thick a layer in one place.

Allow sufficient drying time between coats. For best results, it is recommended to follow the technical information and suitable application conditions.

When painting plastic, it is recommended to use an adhesion-promoting primer suitable for plastic. Before painting the entire part, test on a less visible area.

After use, turn the can upside down and spray briefly until only gas comes out of the nozzle. This helps clean the nozzle and reduces the risk of clogging.

Safety information:

Flammable aerosol

Pressurised container – may burst if heated

Use only in well-ventilated areas

Keep away from heat, sparks, open flames and other ignition sources

Do not spray on an open flame or hot surfaces

Do not pierce or burn, even after use

Protect from direct sunlight

Do not expose to temperatures above 50 °C

Use suitable protective equipment

Do not inhale aerosol mist

Note:

For best results, the surface must be properly prepared. The final result depends on the condition of the substrate, surface preparation, ambient temperature, spraying technique and coat thickness. Before use on sensitive or unknown surfaces, it is recommended to test first.