GOLDCAR+ Gloss Stabilizer Additive for Clear Coat 1 L

GOLDCAR+ Gloss Stabilizer for clear coat 1 L is a professional refinishing additive designed for clear coats and two-component acrylic products. This additive is used instead of standard thinner when improved clear coat application, reduced surface defect risk and stable gloss after curing are required.

GOLDCAR+ Gloss Stabilizer is recommended for use instead of thinner in acrylic products. When added to clear coat, the stabilizer makes the application process easier, reduces the risk of runs and gassing even at higher temperatures, and provides safer and easier application of 2K acrylic clear coats.

This additive is especially useful when working with MS and HS clear coats, where gloss reduction may occur after curing and cooling of the coating. The stabilizer helps reduce the common loss of gloss, especially in MS and HS clear coats, after the coating has cured and cooled down.

When using GOLDCAR+ Gloss Stabilizer, the clear coat spreads more easily on the surface, becomes safer to apply, and the final layer after drying maintains good gloss and initial hardness. This is important in automotive refinishing work, where a clean, even and stable surface result is required.

The product can be used in spray booths, paint preparation areas, body repair workshops and car repair shops. It is suitable for professional clear coat application when compatible clear coats and other acrylic 2K products are used according to the manufacturer’s technical recommendations.

GOLDCAR+ Gloss Stabilizer is not a separate clear coat, not a hardener and not a universal thinner for all refinishing materials. It is a special additive that must be mixed with compatible clear coats or acrylic products according to the specified proportions.

The product capacity is 1 L, product index VDL-07.024.1000-GCP, EAN code 5906735809145, and density is 0.85–0.86 g/cm³.

When used with GOLDCAR clear coats, the technical data sheet of the specific clear coat should be followed. In some systems, the recommended amount is up to 5 % by volume of the clear coat, while other recommendations indicate 5–7 %. Therefore, the exact mixing ratio should always be checked according to the technical data sheet of the clear coat being used.

Before use, make sure the stabilizer is compatible with the selected clear coat or acrylic product. The mixture must be mixed thoroughly, clean mixing cups must be used, and the mixing ratios, spray gun settings and working conditions of the clear coat system must be followed. Since the product is intended for professional refinishing, it must be used in a well-ventilated area or spray booth with suitable personal protective equipment.

GOLDCAR+ Gloss Stabilizer for clear coat 1 L is a practical choice for professional automotive clear coating when improved application, reduced defect risk and stable high gloss after curing are required.

Application:

Stabilizing gloss of clear coats
Additive for clear coat
Use instead of thinner in acrylic products
Easier application of 2K acrylic clear coats
Reducing the risk of gloss loss
Reducing the risk of runs
Reducing the risk of gassing
Maintaining initial coating hardness
Professional automotive clear coating
Body repair work
Spray booths
Paint preparation areas
Car repair shops and body repair workshops

Features:

Manufacturer: GOLDCAR+
Product: Gloss Stabilizer
Type: clear coat additive
Quantity: 1 L
Product index: VDL-07.024.1000-GCP
EAN: 5906735809145
Density: 0.85–0.86 g/cm³
Recommended for use instead of thinner in acrylic products
Suitable for clear coats according to technical recommendations
Suitable for 2K acrylic clear coats according to compatibility
Helps make clear coat application easier
Helps reduce the risk of runs
Helps reduce the risk of gassing
Helps stabilize gloss after curing
Helps maintain good initial coating hardness
Especially useful for MS and HS clear coats
Suitable for professional use
Not a clear coat
Not a hardener
Not a universal thinner

Use recommendations:

Before use, check the technical data sheet of the selected clear coat or acrylic product.
Use only with compatible clear coats or acrylic products.
Choose the mixing ratio according to the technical data sheet of the clear coat being used.
If the product system allows it, use as a thinner replacement.
Add the stabilizer gradually and mix the mixture thoroughly.
Use clean mixing cups and clean painting equipment.
Before spraying, filter the mixture if needed.
Do not exceed the additive amount recommended by the clear coat system.
Do not use as a hardener or as a separate clear coat layer.
Do not use with products whose manufacturer does not recommend thinning or modifying with this additive.
Apply according to the spray parameters of the selected clear coat system.
Work in a spray booth or well-ventilated area.
Use suitable personal protective equipment.
Keep away from open flames, sparks and heat sources.
Store in tightly closed packaging.
Follow the product technical data sheet and safety data sheet.