GOLDCAR KS Overpaintable Protective Anti-Corrosion Body Coating 1 kg

GOLDCAR KS is a professional protective anti-corrosion body coating designed for vehicle body preservation and protection against mechanical and atmospheric influences. The product is used to protect sills, lower body parts, wheel arch areas, boot compartments, internal and external underbody sections, spoilers, lower door parts and other lower vehicle elements.

GOLDCAR KS “baranek” type body protection coating is based on rubber and resins in solvent. The product is intended for protecting sills, boot compartments and internal and external underbody parts. It also helps protect spoilers, sills, doors and other lower body parts from mechanical damage, salt and fuel exposure.

Once dry, GOLDCAR KS forms an elastic, textured protective layer that helps protect the body surface from stones, gravel, water, salt, grease, oils and other external factors. The dried coating is elastic, resistant to gravel and stone impacts, water, salt, grease and oils, has a textured structure and effectively protects the body against corrosion.

This coating is especially useful for areas that are constantly exposed to dirt, moisture, road salt, stone impacts and mechanical wear during vehicle use. These areas may include sills, wheel arches, lower door sections, underbody areas, spoilers, bumper areas and other places where additional anti-corrosion and mechanical protection is required.

GOLDCAR KS coating can be painted after drying. Once dry, the coating can be covered with any type of topcoat / paint system, and both water-based and solvent-based basecoats can be applied over the coated surface.

The product has good resistance to coating cracking and ageing. The coating does not shrink or crack even when used at low temperatures, and its temperature resistance ranges from -25 °C to +80 °C.

GOLDCAR KS also has sound-dampening and anti-vibration properties. This is useful when coating lower body parts, wheel arches or other areas where not only corrosion protection is needed, but also additional reduction of vibrations and noise.

This product description is prepared without specifying the colour, because the colour will be selected in the product variant. GOLDCAR KS 1 kg is available in several colours, including grey, black and white variants.

GOLDCAR KS coating is supplied in a 1 kg package. It is a convenient choice for car repair shops, body repair workshops, paint preparation areas and individual users who need an overpaintable, elastic and resistant body coating for protection against corrosion and mechanical damage.

Before use, the surface must be clean, dry, degreased and free from rust. Dust, dirt, loose old coatings, grease, silicone, wax and other residues that may reduce adhesion must be removed. Adjacent surfaces should be masked to ensure the protective coating is applied only to the selected areas.

The coating should be applied or sprayed according to the selected equipment, product technical data sheet and paint system recommendations. For good protection and an even result, it is better to apply several thinner coats, allowing the coating to dry properly between stages. Before overpainting, make sure the coating is fully dry and suitable for further painting.

GOLDCAR KS 1 kg protective anti-corrosion body coating is a practical solution for protecting lower vehicle body parts from corrosion, stone chips, road salt, moisture and other everyday operating factors.

Application:

Protection of vehicle body against corrosion
Protection of sills
Protection of lower body parts
Protection of wheel arches
Protection of internal and external underbody parts
Protection of boot compartment
Protection of lower door sections
Protection of spoilers and lower elements
Protection against stone and gravel impacts
Protection against water and salt exposure
Protection against grease and oil exposure
Formation of a textured protective structure
Use before painting
Body repair work
Paint preparation work
Car repair shops and body repair workshops

Features:

Manufacturer: GOLDCAR
Product: KS
Type: protective anti-corrosion body coating
Quantity: 1 kg
Colour: selected in the product variant
Base: rubber and resins in solvent
Overpaintable after drying
Creates an elastic protective layer
Textured structure
Protects against corrosion
Protects against stone and gravel impacts
Resistant to water and salt exposure
Resistant to grease and oil exposure
Sound-dampening properties
Anti-vibration properties
Resistant to coating cracking
Resistant to coating ageing
Does not shrink or crack even at lower temperatures
Suitable for water-based and solvent-based paint systems
Suitable for professional use

Use recommendations:

Before use, thoroughly clean, degrease and dry the surface.
Remove rust, dust, dirt, silicone, wax, grease and loose old coatings.
Mask adjacent surfaces so the coating does not reach unnecessary areas.
Before use, prepare the product according to the manufacturer’s technical data sheet.
Apply only to a properly prepared surface.
Apply evenly according to the desired texture and layer thickness.
For better results, apply several thinner coats.
Allow the coating to dry properly between coats.
Before overpainting, make sure the coating is fully dry.
Paint according to the selected paint system recommendations.
Do not use on dirty, wet, greasy or rust-contaminated surfaces.
Work in a well-ventilated area.
Use suitable personal protective equipment.
Follow the product technical data sheet and safety data sheet.