Goldcar+ MULTIFUNCTION Universal Putty 1.8 kg

Goldcar+ MULTIFUNCTION is a multifunctional fine-grain filling putty designed for automotive body repair and surface preparation work. The product is used to fill uneven areas on steel and polyester-glass laminate surfaces where reliable adhesion, easy shaping and a smooth surface before further priming or painting are required.

This putty has good modelling properties in both thin and thicker layers. Thanks to its fine-grain structure and suitable hardness in relation to paint system coatings, the product can be used not only as a filling putty, but also as a smoothing / finishing putty. After sanding, it helps create a smooth, pore-free surface and makes further surface preparation easier.

Goldcar+ MULTIFUNCTION is suitable for filling body dents, surface waves, uneven areas, small defects and larger repair areas. The putty is easy to shape even when applied in thicker layers, while deeper uneven areas should be filled in several layers. During sanding, the putty does not clog abrasive paper, helping the work process stay faster and cleaner.

The product is intended for dry manual and machine sanding with abrasive materials. It is a practical choice for car repair workshops, body repair shops, paint preparation areas and technicians who need one universal putty for both filling and surface smoothing.

Before use, the repaired surface must be clean, dry, degreased and abraded. The putty should be mixed with BPO hardener according to the manufacturer’s recommendations, applied with a spreader and dry sanded after curing. Proper surface preparation and correct hardener dosage help avoid curing, adhesion or final coating defects.

Application:

Filling uneven areas
Steel surfaces
Polyester-glass laminate surfaces
Automotive body repair
Filling and smoothing work
Preparation before priming and painting
Manual and machine dry sanding
Professional and enthusiast use

Features:

Manufacturer: Goldcar+
Model: MULTIFUNCTION
Type: universal fine-grain filling putty
Quantity: 1.8 kg
Colour: blue
Density: approx. 1.9 g/cm³
Suitable as filling and smoothing putty
Easy to shape in thin and thicker layers
Creates a smooth, pore-free surface after sanding
Does not clog abrasive paper during sanding
Designed for dry manual and machine sanding
Shelf life: 12 months

Use recommendations:

Clean, degrease and abrade the surface.
Use only on a dry and properly prepared surface.
Mix the putty thoroughly with BPO hardener according to the manufacturer’s recommendations.
Apply with a spreader in a thin or thicker layer according to the repair needs.
Fill deeper uneven areas in several layers.
After curing, sand dry manually or by machine.
Do not overdose hardener, as this may affect further coatings.
Not recommended for use at too low temperatures; follow the technical data sheet recommendations.