GoldCar+ Ultra-Light Carbon Fibre Putty 1000 ml

GoldCar+ ultra-light carbon fibre putty 1000 ml is a professional multifunctional lightweight putty designed for automotive body repair, surface restoration and preparation work.

The putty is reinforced with carbon fibre, making it suitable for surfaces that are heavily damaged or exposed to higher loads during use. It is a practical choice for repairing body panels, damaged zones, larger surfaces and areas where stronger filling is required.

Thanks to lightweight fillers, GoldCar+ putty can be used on larger areas without adding excessive weight to the structure. This is especially important in automotive body repair, where strength, good filling ability and lower weight need to be balanced.

The putty can be applied in both thin and thicker layers. This allows it to be used at different repair stages – from correcting surface unevenness to stronger filling of damaged areas.

GoldCar+ carbon fibre putty offers good adhesion to metal surfaces: steel, galvanised steel and aluminium. It is also suitable for polyester laminates, making it useful for various automotive repair, body preparation and workshop applications.

The graphite colour helps identify the applied layer during work, and after sanding, the properly prepared surface can be further processed according to the selected priming or painting system.

Main features:

Ultra-light automotive putty

Reinforced with carbon fibre

Multifunctional use

Designed for heavily damaged surfaces

Suitable for areas exposed to higher loads

Can be used on larger areas

Lightweight fillers reduce structural load

Can be applied in thin layers

Can be applied in thicker layers

Good final surface quality

Good adhesion to steel

Suitable for galvanised steel

Suitable for aluminium

Suitable for polyester laminates

Suitable for automotive body repair

Suitable for surface shaping and filling

Suitable for professional use

Technical data:

Manufacturer: GoldCar+

Product type: lightweight putty with carbon fibre

Capacity: 1000 ml

Colour: graphite

Density: 1.1–1.2 g/cm³

Shelf life: 12 months

Product code: VSW-01.040.1000-X01

EAN: 5906735807844

Purpose: repair and filling of damaged surfaces

Adhesion: steel, galvanised steel, aluminium, polyester laminates

Use:

Before use, clean, degrease and properly prepare the surface according to the repair process. Remove rust, old poorly adhering coatings, dirt and dust.

Prepare the putty according to the manufacturer’s technical data sheet. Apply to a properly prepared surface in a thin or thicker layer, depending on the depth of the defect and type of repair.

After the putty has hardened, sand the surface with the selected abrasive grit, shape the required surface level and prepare it for further work – priming, painting or other processing.

Note:

Before use, it is recommended to follow the manufacturer’s technical data sheet. The final result depends on surface preparation, mixing ratio, ambient temperature, layer thickness, drying conditions and sanding technique.