HS GoldCar+ Anti-Scratch 2:1 Acrylic Clear Coat with Hardener

HS GoldCar+ Anti-Scratch 2:1 acrylic clear coat with hardener is a professional 2K clear coat kit designed for automotive body painting, refinishing and repair work.

This product is sold as a complete kit with hardener, so the customer does not need to purchase the hardener separately. The kit includes clear coat and the matching hardener for a 2:1 mixing ratio.

Capacity selection available:

1.5 L kit – 1 L clear coat + 0.5 L hardener

7.5 L kit – 5 L clear coat + 2.5 L hardener

GoldCar+ Anti-Scratch clear coat is suitable for use over water-based and solvent-based base coats. It is applied as the final transparent protective layer, giving the surface gloss, protection and a longer-lasting visual finish.

The clear coat offers increased scratch resistance, making it suitable for professional painting work where a hard, durable and resistant coating is required. This is especially important for automotive body panels exposed to washing, environmental impact and mechanical contact.

The high content of UV filters helps protect the surface from UV exposure and yellowing. This helps maintain a clear, clean and long-lasting clear coat appearance.

Thanks to its good flow properties, the clear coat helps create a smooth, glossy and visually clean surface. This is especially important when painting automotive body parts where a high-quality finish and good final appearance are required.

GoldCar+ Anti-Scratch 2K clear coat is resistant to UV rays, chemical and weather conditions. It is suitable for automotive repair, body painting, spray booths and professional bodyshops.

The included GoldCar+ hardener is designed for this 2K clear coat with increased scratch resistance. The 2:1 mixing ratio means that two parts of clear coat are mixed with one part of hardener.

Main features:

2K clear coat kit

Sold with hardener

Capacity selection available

1.5 L kit or 7.5 L kit

Mixing ratio 2:1

HS type clear coat

Anti-Scratch – increased scratch resistance

Hard and durable coating

High content of UV filters

Resistant to UV rays

Helps prevent yellowing

Resistant to chemical factors

Resistant to weather conditions

Good flow properties

Provides a glossy surface

Suitable for professional automotive clear coating

Suitable for water-based base coats

Suitable for solvent-based base coats

Applied with a spray gun

Suitable for spray booths and bodyshops

Technical data:

Manufacturer: GoldCar+

Product type: 2K acrylic clear coat with hardener

Clear coat type: HS

Mixing ratio: 2:1

Clear coat colour: transparent

Hardener colour: transparent / slightly yellowish

Clear coat density: 0.96 g/cm³

Hardener density: 1.00 g/cm³

Shelf life: 12 months

Available kits: 1.5 L and 7.5 L

1.5 L kit: 1 L clear coat + 0.5 L hardener

7.5 L kit: 5 L clear coat + 2.5 L hardener

Purpose: automotive body clear coating

Use: over base coats

Application method: spray gun

Use:

Before use, the surface must be properly prepared according to the painting process. The clear coat is applied over water-based or solvent-based base coats once the base layer is ready for clear coating.

Mix the clear coat with the included hardener at a 2:1 ratio. Use the prepared mixture according to the manufacturer’s technical data sheet and working conditions.

Apply with a spray gun, properly adjusting air pressure, material flow and spraying technique. During work, follow all requirements for paint material use, ventilation and personal protection.

Note:

This is a 2K clear coating product intended for professional use. Before use, it is recommended to follow the manufacturer’s technical data sheet. The final result depends on surface preparation, base coat, mixing ratio, temperature, spraying technique, drying conditions and equipment used.