Koch-Chemie Micro Cut M2.02 anti-hologram polishing compound 1 L

Koch-Chemie Micro Cut M2.02 anti-hologram polishing compound 1 L is a professional finishing micro polish designed for the final paint correction stage, hologram removal and high-gloss restoration. It is used when polishing haze, fine marks and light defects need to be removed after a stronger cutting or correction stage, leaving a clear and clean surface appearance.

Micro Cut M2.02 is designed for long-term removal of polishing haze, holograms, fine scratches and sanding marks from P4000 on all paint systems, including scratch-resistant clear coats. This means the compound is suitable for standard, harder and more sensitive automotive clear coats.

M2.02 contains highly specialised and extremely homogeneous abrasives. They mechanically remove holograms and fine scratches rather than only masking them. This helps the surface remain clean, while the result stays more stable and visible even after wiping or degreasing the surface.

This compound is especially useful on dark, black, soft or sensitive paints, where holograms, polishing haze and fine micro-marks are most visible. When used correctly, Micro Cut M2.02 helps create a deep, sharp and long-lasting gloss even under strong lighting.

Koch-Chemie Micro Cut M2.02 is not an aggressive cutting compound. It is intended for finishing / anti-hologram polishing, when the main defects have already been removed or when the surface needs gentle refreshing, light defect removal and preparation for wax, sealant or ceramic coating.

Micro Cut M2.02 is free from silicone oils, fillers and waxes, making it suitable for professional work where it is important to see the real polishing result rather than temporarily hidden defects.

Features:

• Type: anti-hologram micro polishing compound

• Manufacturer: Koch-Chemie

• Model: Micro Cut M2.02

• Capacity: 1 L

• Purpose: finishing / anti-hologram polishing

• Designed to remove polishing haze and holograms

• Suitable for fine scratches and P4000 sanding marks

• Suitable for all paint systems, including scratch-resistant clear coats

• Mechanically removes fine defects instead of only masking them

• Helps achieve deep and long-lasting gloss

• Suitable for dark, sensitive and soft paints

• Free from silicone oils, fillers and waxes

Application:
Before polishing, wash, dry and, if needed, degrease the surface thoroughly. Apply a small amount of Koch-Chemie Micro Cut M2.02 to a soft or anti-hologram polishing pad. Work with a rotary or DA / orbital polishing machine according to the paint condition and selected pad. Start at a lower speed, spread the compound evenly, then work the surface with controlled pressure. Remove residue with a clean microfibre cloth. After polishing, the surface can be inspected with a degreasing product and protected with the selected coating, wax or sealant.