MAVAR C3500 2K MS Acrylic Clear Coat 2:1 with Hardener 1.5 L

MAVAR C3500 is a professional two-component acrylic clear coat designed for automotive refinishing and body repair.

The MS formula with medium solids content provides good flow and increased scratch resistance, helping create a smooth, glossy and durable protective finish.

The clear coat is applied over a properly prepared and completely dry basecoat. Suitable for individual body panel repairs as well as larger refinishing jobs.

Benefits:

• two-component 2K acrylic clear coat;
• MS – medium solids technology;
• increased scratch resistance;
• good flow and levelling;
• creates a smooth and glossy finish;
• durable protective coating;
• mixed with MAVAR H3500 hardener at a 2:1 ratio;
• suitable for professional automotive refinishing;
• can be air-dried or force-dried in a spray booth.

Directions:

1. Ensure the basecoat is completely dry and ready for clearcoat application.
2. Mix 2 parts MAVAR C3500 clear coat with 1 part H3500 hardener.
3. Mix thoroughly and use the prepared mixture within 1 hour.
4. Apply 2–3 coats using a spray gun with a 1.3–1.4 mm nozzle.
5. Allow approximately 5 minutes of flash-off time between coats.
6. Clean the spray equipment immediately after use.

Technical information:

• manufacturer: MAVAR;
• model: C3500;
• type: 2K MS acrylic clear coat;
• mixing ratio by volume: 2:1;
• mixing ratio by weight: 100 g clear coat to 50 g hardener;
• pot life: approximately 1 hour;
• recommended number of coats: 2–3;
• flash-off time: approximately 5 minutes;
• spray gun nozzle: 1.3–1.4 mm;
• recommended pressure: 1.8–2.2 bar;
• viscosity DIN 4 at 20 °C: 16–19 seconds;
• drying at 20 °C: approximately 8 hours;
• drying at 60 °C: approximately 30 minutes.

Kit contents:

• MAVAR C3500 clear coat – 1 L;
• MAVAR H3500 hardener – 0.5 L;
• total kit capacity – 1.5 L.

Use with suitable personal protective equipment in a properly ventilated spray area.