NAT foam gap masking tape 13 mm x 10 mm

NAT foam gap masking tape 13 mm x 10 mm is a soft foam masking tape designed for automotive painting and body repair work. It is used to protect door gaps, bonnet gaps, boot gaps, wing areas, openings, cavities and other hard-to-reach gaps from paint overspray and dust during painting.

Foam masking tape helps protect the vehicle’s inner areas and surrounding surfaces during painting. It is especially useful when a gap needs to be masked, but a hard, clearly visible paint line should be avoided. The soft 13 mm x 10 mm foam profile allows paint to transition gradually, creating a softer paint edge.

The tape is suitable for door openings, bonnet and boot gaps, wing areas, body panel joints and other areas where cavities need to be protected from paint overspray during painting. The foam fills gaps elastically and helps reduce the risk of paint or clear coat entering unwanted areas.

The soft edge helps avoid a sharp paint cut-off, which often appears when using standard hard masking tape. This makes the foam tape especially useful when a cleaner, more natural and less visible paint transition is required.

The special adhesive bonds well to the masked surface, but does not leave adhesive marks when removed. The tape is easy to remove after painting or clear coating and helps keep the work process clean and organised.

NAT foam gap masking tape is suitable for professional paint shops, body repair workshops, vehicle preparation work and all cases where gaps need to be masked quickly, cleanly and reliably before painting or clear coating.

Features:

• Type: foam gap masking tape

• Manufacturer: NAT

• Colour: white

• Size: 13 mm x 10 mm

• Length: selected by product variant

• Designed for masking gaps, cavities and hard-to-reach areas

• Protects cavities from paint overspray

• Helps avoid a sharp paint edge

• Creates a softer paint transition

• Special adhesive leaves no marks after removal

• Elastically fills gaps and cavities

• Suitable for door, bonnet, boot and body panel gaps

• Designed for automotive painting and body repair work

Application:
Before applying, the surface should be clean, dry and degreased. Place the foam tape into the required gap or cavity so that it fills the area and protects it from paint overspray. Do not press too hard, so the soft foam profile can form a smooth paint transition. After painting and drying, carefully remove the tape from the surface.