NAT MULTI MICROgrip SOFT sanding interface pad 150 mm

NAT MULTI MICROgrip SOFT sanding interface pad 150 mm is a soft interface pad designed for sanding work with round 150 mm sanding discs. It is installed between the backing pad and the sanding disc, allowing the abrasive to work more softly and evenly on different surface shapes.

This SOFT interface pad is especially useful when sanding complex surfaces: edges, panel transitions, rounded areas, raised sections and paint defect areas. In these places, a sanding disc used directly on the backing pad can work too aggressively, increasing the risk of sanding through the clear coat or paint layer. The soft interface pad helps reduce this risk and provides more control during work.

NAT MULTI MICROgrip SOFT pad can be used not only for preparation work, but also for finishing soft curves and profiles. This makes it suitable for both surface preparation and more careful finishing sanding, where better adaptation to the shape of the panel is required.

The pad is made from components intended for preparation work. It is resistant to dust, water and high temperature, making it suitable for professional body repair, paint preparation, priming and surface processing work.

The MULTI hole system is designed for widely used round sanding discs with hook-and-loop fastening. This helps maintain compatibility with 150 mm sanding discs and allows more convenient work with dust extraction when used with a compatible backing pad and sanding disc.

MICROgrip fastening allows the sanding disc to be attached securely to the interface pad and replaced quickly during work. This is important in paint preparation, body repair, priming, clear coat sanding and surface correction work, where different grit sanding discs are often changed.

NAT MULTI MICROgrip SOFT sanding interface pad 150 mm is suitable for professional paint shops, body repair workshops, vehicle preparation work and detailing studios where controlled, clean and even sanding results are important.

Features:

• Type: SOFT sanding interface pad

• Manufacturer: NAT

• Series: MULTI MICROgrip SOFT

• Diameter: 150 mm

• Colour: black

• Thickness: selected by product variant

• Fastening: MICROgrip / hook-and-loop fastening

• Hole system: MULTI

• Product code: depends on selected variant

• Designed to be used between backing pad and sanding disc

• Suitable for complex surfaces, edges, curves, rounded areas and raised sections

• Helps reduce the risk of sanding through the paint or clear coat

• Can be used for preparation and finishing sanding work

• Resistant to dust, water and high temperature

• Compatible with round 150 mm sanding discs with hook-and-loop fastening

• Suitable for body repair, paint preparation and surface processing

Application:
Attach the NAT MULTI MICROgrip SOFT sanding interface pad to a compatible 150 mm backing pad. Attach a sanding disc with a compatible MULTI hole system onto the interface pad. If dust extraction is used, make sure the holes align with the backing pad and sanding disc. Sand with controlled pressure, working especially carefully on edges, curves and paint defect areas. Replace the sanding disc when the abrasive wears out or becomes clogged with dust.