Products catalog
Home/PREP & PAINT/Aerosols
  • New item   -17%RAPTOR 1K BLACK Protective Coating Aerosol, 450 ml
    New item   -17%RAPTOR 1K BLACK Protective Coating Aerosol, 450 ml 1

    RAPTOR 1K BLACK Protective Coating Aerosol, 450 ml

    Inquire about this item
    Price 15.00 € VAT incl.
    18.00 € You save 3.00 €
    In stock.

    RAPTOR 1K BLACK is a black, single-component aerosol coating that creates a textured protective finish. Helps protect against scratches, impact, abrasion, corrosion and water damage. Suitable for properly prepared metal, aluminium, fibreglass, plastic and wood. Volume: 450 ml.

    Manufacturer
    U-POL

  • RAPTOR 1K BLACK Protective Coating is designed to protect vehicles, trailers, railings, stairs, metal furniture and other surfaces. It dries to form a black, textured, abrasion-resistant finish, helping protect against everyday mechanical wear and environmental exposure.

    The single-component 1K formula is ready to use without mixing with a hardener. Aerosol packaging allows application without a spray gun. The coating resists fading from sunlight and offers good adhesion to properly prepared substrates.

    Key features:

    • BLACK colour.
    • Textured finish for decorative and protective applications.
    • Resistance to abrasion, scratches and impact.
    • Protection against corrosion and water damage.
    • Suitable for various properly prepared substrates.
    • Convenient application from a single-component aerosol.

    Technical specifications

    Specification Details
    Brand RAPTOR
    Manufacturer U-POL
    Product code RMUB/AL
    Product 1K Multi-Use Protective Coating
    Type Single-component protective coating aerosol
    Colour Black
    Volume 450 ml
    Finish Textured
    Recommended number of coats 1–2
    Spraying distance Approximately 30 cm
    Recommended application temperature +20 °C
    Flash-off between coats at +20 °C 10–15 minutes
    Touch-dry at +20 °C Less than 60 minutes
    Dry-through at +20 °C 3–4 hours
    Theoretical coverage 0.8–1 m² per can

    Coverage and drying time depend on coating thickness, application conditions and temperature.

    Directions for use

    1. Clean, degrease and prepare the surface according to the substrate. For bare steel, aluminium and galvanised metal, the manufacturer recommends an acid etch primer; for plastics, use an adhesion promoter.
    2. Shake the can for at least 2 minutes.
    3. Spray from approximately 30 cm, applying 1–2 coats.
    4. Allow 10–15 minutes between coats at +20 °C.
    5. After use, invert the can and spray briefly to clear the nozzle.