RUPES foam sanding interface pad 150 mm MULTIHOLES

RUPES foam sanding interface pad 150 mm MULTIHOLES is a soft foam interface pad designed for sanding work with 150 mm abrasive discs. It is installed between the sander backing pad and the sanding disc, allowing the abrasive to adapt better to the shape of the surface.

This pad is especially useful when working on curved, profiled, rounded or more sensitive surfaces where a sanding disc used directly on the backing pad may work too aggressively. The soft interface layer helps reduce the risk of uneven pressure, improves disc contact with the surface and allows a cleaner, more consistent result.

RUPES Foam Interface Pads are designed to improve sanding results by allowing the abrasive disc to conform to different panel shapes and produce a better, more even finish. The 150 mm MULTIHOLES version is suitable for use with abrasive discs and backing pads with the matching hole configuration.

The MULTIHOLES system helps maintain effective dust extraction when used with compatible sanding discs, backing pads and dust collection systems. This is important in body preparation, painting, priming and surface correction work, where a cleaner work area helps control the result more accurately.

The interface pad can be used when sanding primer, clear coat, painted surfaces, body repair areas and other surfaces where a softer sanding disc action is required. It also helps reduce the risk of deeper sanding marks, especially when working with finer grits or performing final surface preparation before painting, clear coating or polishing.

The RUPES 150 mm MULTIHOLES Foam Interface Pad version is available in 7 mm and 12 mm thicknesses. If the product has thickness options, the main product name can be used without specifying the thickness, and the thickness can be selected as a product variant.

This pad is suitable for professional paint shops, body repair workshops, vehicle preparation work and detailing studios where controlled, clean and even sanding results are important.

Features:

• Type: sanding interface pad / foam interface pad

• Manufacturer: RUPES

• Diameter: 150 mm

• Hole system: MULTIHOLES

• Thickness: selected by variant, 7 mm or 12 mm

• Codes by thickness: 981.322 / 981.323

• Material: soft foam

• Installed between backing pad and sanding disc

• Helps the disc adapt better to the surface shape

• Helps achieve a more even sanding result

• Suitable for curved, profiled and more sensitive surfaces

• Helps reduce overly aggressive disc action

• Compatible with 150 mm sanding discs and MULTIHOLES system

• Suitable for body repair, paint preparation and surface processing

Application:
Attach the RUPES foam sanding interface pad to a compatible 150 mm backing pad. Attach a 150 mm sanding disc with a compatible MULTIHOLES configuration onto the interface pad. Make sure the holes align if a dust extraction system is used. Sand with controlled pressure, allow the pad to adapt to the surface shape and check the result regularly. Replace the sanding disc when the abrasive wears out or becomes clogged with dust.