RUPES LHR15 / LHR21 Mark III Polishing Machine Power Switch 45.372

RUPES LHR15 / LHR21 Mark III polishing machine power switch 45.372 is an original spare part designed for RUPES BigFoot Mark III random orbital polishing machines. This switch is used to turn the tool on and off, making it an important part of the electrical control system.

RUPES Power Switch 45.372 is an original RUPES spare part according to the exploded parts diagram. It is suitable for Mark III models: LHR15 Mark III and LHR21 Mark III, and is intended for European models.

The switch is relevant when the polishing machine does not turn on, the switch sticks, does not lock properly, is mechanically damaged or starts working inconsistently after extended use. Replacing the switch in time helps restore proper tool control and safe operation.

RUPES BigFoot LHR15 Mark III and LHR21 Mark III polishing machines are used for professional automotive paint correction, detailing work, body repair workshops and car repair shops. During intensive use, the power switch may be affected by mechanical load, dust, compound residue and the working environment, so over time it may need replacement.

This part is not a speed controller, electronic module, cable or motor component. It is an on / off switch designed for specific RUPES Mark III models. Before ordering, it is important to check the machine model and part code, as spare parts may differ between different RUPES BigFoot versions.

The switch is suitable for the following models:

RUPES BigFoot LHR15 Mark III
RUPES BigFoot LHR21 Mark III

Before replacing accessories, making adjustments or repairs, the tool must be switched off and disconnected from the power source, and the switch must be in the “OFF” position to prevent accidental start-up.

Because this is an electrical spare part, installation should be carried out according to the RUPES exploded parts diagram and technical recommendations. If there is no experience with electric tool repair, switch replacement should be entrusted to a qualified tool repair specialist.

RUPES LHR15 / LHR21 Mark III switch 45.372 is a practical spare part for professional detailing centres, car repair shops and body repair workshops where RUPES polishing machines are used intensively and quick restoration of tool operation is important.

Application:

For RUPES LHR15 Mark III polishing machine
For RUPES LHR21 Mark III polishing machine
Replacement of the power switch
Replacement of a damaged switch
Replacement of a worn switch
Replacement of an unstable switch
Restoring polishing machine control
Professional tool repair
Detailing centres
Car repair shops
Body repair workshops

Features:

Manufacturer: RUPES
Part code: 45.372
Type: on / off power switch
Application: polishing machine spare part
Compatibility: RUPES LHR15 Mark III and LHR21 Mark III
Series: RUPES BigFoot Mark III
Part type: electrical control part
Use: switch replacement
Original RUPES spare part
Designed for European models
Helps restore the tool power function
Suitable for professional tool maintenance
Not a speed controller
Not an electronic module
Not a power cable
Not a polishing pad

Use recommendations:

Before ordering, check the polishing machine model and part code.
Use only with compatible RUPES LHR15 Mark III and LHR21 Mark III models.
Before replacement, switch off the tool and disconnect it from the power supply.
Make sure the switch is in the OFF position.
Carry out replacement according to the RUPES exploded parts diagram and technical recommendations.
Do not replace the switch if you have no experience with electric tool repair.
During installation, check the condition of wires, contacts and housing.
After replacement, check that the switch works smoothly and consistently.
Do not use the tool if heat, sparking, smell or unstable operation is noticed after replacement.
Replace damaged electrical parts only with suitable spare parts.
If in doubt, contact a qualified tool repair specialist.
Use according to RUPES technical and safety recommendations.