Suede Cloths for Ceramic Coatings 12 x 12 cm, 10 pcs.

Suede Cloths for Ceramic Coatings 12 x 12 cm, 10 pcs. are a practical set of suede-type microfiber cloths designed for applying protective coatings and care products to vehicle surfaces.

These cloths are used together with an applicator sponge when ceramic coatings, waxes, dressings or other protective products need to be applied evenly. The compact 12 x 12 cm size is convenient for use with an applicator and allows precise control of the application area.

Suede-type microfiber is soft and suitable for careful product spreading on painted, lacquered, plastic, glass or other suitable surfaces. These cloths are often used in detailing work, where it is important to apply the product in a thin, even layer and avoid using too much product.

The cloths have ultrasonic-cut wavy edges, so there are no hard seams that could interfere with work or leave unwanted marks. They also have no washing label, which is an additional advantage when working on sensitive surfaces and reducing unnecessary contact elements.

The microfiber composition is 80% polyester and 20% polyamide. The 210 g/m² weight gives the cloth enough softness and stability when applying protective products. The white colour helps make product residues or possible dirt easier to see during work.

The set includes 10 cloths, making it convenient for both professional and household use. For single-use or limited-use work with ceramic coatings, it is recommended to use clean cloths to avoid hardened coating residues and the risk of surface damage.

Main features:

Suede-type microfiber cloths

Designed for applying ceramic coatings

Suitable for waxes

Suitable for dressings

Suitable for protective products

Used with an applicator sponge

Size 12 x 12 cm

Set of 10 pcs.

Soft microfiber

Convenient for product spreading

Helps apply a thin and even layer

Ultrasonic-cut edges

Wavy edges

No washing label

White colour

Suitable for automotive detailing work

Suitable for professional and household use

Technical data:

Product type: microfiber suede cloths

Purpose: applying ceramic coatings, waxes and dressings

Size: 12 x 12 cm

Quantity in pack: 10 pcs.

Colour: white

Weight: 210 g/m²

Composition: 80% polyester, 20% polyamide

Edges: wavy, ultrasonic-cut

Washing label: none

Use: with applicator sponge

Product code: 601.300.200

Application: cars, motorcycles, campers, boats and other suitable surfaces

Use:

Place the cloth over an applicator sponge. Apply the selected ceramic coating, wax, dressing or other protective product according to the product instructions.

Spread the product evenly over the surface using consistent movement directions. Work in small areas and follow the coating or product manufacturer’s recommendations for flash-off, application and wipe-off times.

Use only a clean cloth. If the cloth hardens, becomes dirty or absorbs too much product, replace it with a new one. When working with ceramic coatings, hardened cloths should not be reused on sensitive surfaces.

After work, dispose of the cloth or wash it only if the product used allows it. Some ceramic coatings may harden in the microfiber and make the cloth unsuitable for safe reuse.

Note:

Always follow the instructions of the product being applied. Do not use a dirty, hardened or dropped cloth on painted, lacquered, glossy or easily scratched surfaces.