Products catalog
  • TONYIN SLICK & GLOSS GRAPHENE SHAMPOO 3-in-1 500 ml 1:100

    TONYIN SLICK & GLOSS GRAPHENE SHAMPOO 3-in-1 is a concentrated graphene car shampoo that cleans, enhances gloss and leaves a light hydrophobic protective layer. Its high-foaming formula helps safely remove dirt and maintain ceramic and graphene coatings.

    Manufacturer
    TONYIN
  • TONYIN SLICK & GLOSS GRAPHENE SHAMPOO 3-in-1 is a professional concentrated car shampoo designed to clean the surface, enhance gloss and provide additional protection.

    Its graphene and ceramic resin technology helps remove road dirt and other contaminants. During washing, the shampoo creates rich foam and a slick lubricating layer that reduces friction between the wash mitt and the surface, helping to minimise the risk of wash-induced scratches.

    After washing, a thin protective layer remains on the surface, enhancing the gloss, smoothness and hydrophobic properties of the paintwork. Water forms beads and runs off the surface more easily, making the vehicle easier to dry.

    The shampoo is especially suitable for vehicles protected with ceramic, graphene, synthetic or other protective coatings. Regular use helps revitalise and maintain the properties of previously applied coatings.

    Main features:

    • 3-in-1 action – cleans, enhances gloss and protects.
    • Graphene and ceramic resin technology.
    • Leaves the surface slick and smooth.
    • Enhances paint gloss.
    • Improves water-repellent properties.
    • Produces rich foam for safer dirt removal.
    • Helps maintain ceramic and graphene coatings.
    • Suitable for regular vehicle washing.

    Directions for use:

    Shake the product before use. Dilute the shampoo with water at a ratio of 1:100 – approximately 10 ml of product per 1 litre of water.

    Pre-rinse the vehicle with water. Apply the prepared solution and wash the vehicle with a clean wash mitt or sponge, starting from the top and working downwards. The two-bucket washing method is recommended.

    After washing, rinse the surface thoroughly with clean water and dry it using a microfibre drying towel or an air blower.

    Do not use on hot surfaces or in direct sunlight. Do not allow the product to dry on the surface. Test on an inconspicuous area before use and follow the application and safety instructions provided on the product label.

    Technical information:

    Capacity: 500 ml
    Dilution: 1:100
    Product code: TN04D
    Product type: 3-in-1 graphene car shampoo