CARSYSTEM Bumper Paint Black Textured Paint for Plastic 1 l

CARSYSTEM Bumper Paint is a professional acrylic textured paint designed for repairing, refreshing and restoring the texture of plastic car parts. This is a 1 l black product used for bumpers, plastic trims, mouldings, sill trims, exterior plastic parts and other plastic automotive components.

CARSYSTEM Bumper Paint is a textured coating designed to restore original bumper structures or create new structures on plastic parts. The product can be applied directly to plastic without an additional primer and can also act as an adhesion-promoting primer for plastic. By changing application conditions, different surface textures can be achieved.

This textured paint for plastic is especially suitable for refreshing old, faded, scratched or damaged plastic parts. The coating helps restore the characteristic plastic surface texture, so the repaired part looks more natural and uniform. It is a practical solution for the renovation of bumpers, plastic trims and other visible plastic car parts.

CARSYSTEM Bumper Paint can be used not only as a final textured coating, but also as a base for further painting. The product can be overpainted with 2K acrylic topcoats and used in one-coat or two-coat paint systems.

Because the surface texture can be adjusted, the product is suitable for various plastic repair jobs. The final texture depends on application conditions, spraying technique, layer thickness, spray pressure and equipment used. This allows the finish to be matched to the original texture of the repaired part.

Before application, the plastic surface must be clean, dry, degreased and properly abraded. Silicone, wax, dirt, grease, dust, loose old coatings and other adhesion-reducing residues must be removed. Although the product can be used directly on plastic without an additional plastic primer, proper surface preparation is very important.

CARSYSTEM Bumper Paint black 1 l textured paint is intended for professional use in body repair workshops, paint areas and car repair shops. The product is suitable when a plastic part needs not only to be painted, but also to have its surface texture restored or recreated.

Application:

Repairing plastic car parts
Refreshing old and faded plastic parts
Renovating damaged plastic surfaces
Bumpers and bumper trims
Mouldings and exterior plastic parts
Sill trims
Restoring a texture close to the original plastic surface
Creating a new texture on plastic parts
Use as a textured plastic coating
Use as an adhesion-promoting base for plastic
Professional body repair and paint work

Features:

Manufacturer: CARSYSTEM
Product: Bumper Paint
Type: textured paint for plastic
Product type: acrylic
Colour: black
Quantity: 1 l
Article number: 147.447
Application: plastic repair and renovation
Restores a texture close to the original plastic surface
Allows new textures to be created on plastic
Can be applied directly to plastic without an additional primer
Can act as an adhesion-promoting primer for plastic
Can be overpainted with 2K acrylic paints
Suitable for one-coat and two-coat paint systems
Texture can be adjusted according to application conditions
Suitable for professional use

Use recommendations:

Clean, degrease and dry the surface thoroughly.
Remove silicone, wax, grease, dust and loose old coatings.
Abrade the plastic surface properly according to the repair system recommendations.
Mix the product well before use.
Choose the correct spraying equipment and settings according to the desired texture effect.
Before applying to a visible part, make a test spray.
Apply in even coats while controlling texture intensity.
To achieve a different texture, adjust layer thickness, spraying distance and pressure.
If additional painting is planned, follow the recommended drying and overpainting time.
Use suitable personal protective equipment and work in a well-ventilated area.
Follow the product technical data sheet and safety data sheet.