3M Hookit Half Round hand sanding pad 05792, 150 mm

3M Hookit Half Round hand sanding pad 05792 is a special backing pad designed for hand sanding in areas where a standard round sanding disc or sanding machine cannot reach. It is used with 150 mm / 6" 3M Hookit sanding discs, which wrap around the pad and hold securely thanks to the Hookit fastening system.

The half-round pad shape provides two working areas: a straight edge and a curved edge. The 6 mm / 1/4" edges help sand contours, narrow vertical surfaces, corners and other hard-to-reach areas during body repair or paint preparation work.

The medium-density foam construction provides good support for levelling work while allowing the pad to adapt to the surface shape. This helps achieve a more even sanding result, especially when working on curved, profiled or limited-access surfaces.

3M Hookit Half Round Pad is especially useful for automotive body repair, paint preparation, surface levelling and local defect removal. It allows the same 150 mm Hookit sanding disc format to be used for hand sanding when more precision is needed than with machine sanding.

The Hookit fastening system allows the sanding disc to be applied, removed and replaced quickly. This is convenient in workshops where different grit discs are changed often or small hand sanding jobs are performed before priming, painting, clear coating or polishing.

This pad is suitable for professional paint shops, body repair workshops, vehicle preparation work and users who need a convenient hand sanding solution with 150 mm Hookit discs.

Features:

Type: hand sanding backing pad

Manufacturer: 3M

Model / code: 05792

Series: Hookit Half Round Pad

Size: 150 mm / 6"

Shape: half-round

Fastening: Hookit / hook-and-loop

Construction: medium-density foam

Edges: straight and curved 6 mm / 1/4" edge

Designed for 150 mm / 6" 3M Hookit sanding discs

Suitable for hand sanding in hard-to-reach areas

Convenient for contours, corners and narrow surfaces

Suitable for body repair, paint preparation and surface levelling

Application:
Wrap a 150 mm / 6" 3M Hookit sanding disc around the 3M Hookit Half Round pad so that the disc holds securely on the hook-and-loop surface. Choose the straight or curved pad edge depending on the area being sanded. Sand with controlled pressure, check the surface regularly and replace the disc when the abrasive wears out or becomes clogged with dust. After use, clean the pad from dust and store it clean to keep the Hookit surface effective.