GOLDCAR ML Anti-Corrosion Cavity Wax 1 L
| ID: | 2048 |
Penetrating wax- and lanolin-based anti-corrosion treatment for concealed vehicle cavities. Displaces water and moisture, forming a flexible protective layer resistant to water, road salt and temperature changes.
GOLDCAR ML is a professional one-component anti-corrosion product designed to protect concealed vehicle cavities and difficult-to-reach profiles. Its wax- and lanolin-based formula has excellent penetrating properties, allowing it to reach narrow gaps, joints and welded seams.
The product displaces water and moisture. After the solvent evaporates, it leaves a flexible, sealed protective layer with good adhesion to metal. This provides long-lasting protection against corrosion, water, salt and harsh weather conditions.
GOLDCAR ML is suitable for protecting doors, pillars, sills, bonnet sections, boot areas and other vehicle body cavities. It can also be used inside enclosed profiles of industrial machinery. The product does not damage automotive paintwork.
Main features:
- Designed for concealed cavities and difficult-to-reach profiles.
- Wax- and lanolin-based formula.
- Excellent penetrating and creeping properties.
- Displaces water and moisture.
- Provides long-lasting corrosion protection.
- Forms a flexible and sealed protective layer.
- Good adhesion to metal surfaces.
- Resistant to water and road salt.
- Resistant to high summer and low winter temperatures.
- Does not damage automotive paintwork.
- Can be applied using a cavity protection gun or brush.
Directions for use:
Remove rust before application, then degrease and abrade the surface. Mask all areas that are not to be treated.
Shake the container thoroughly before use, approximately 40 times. Apply at a temperature between +15 °C and +30 °C using a cavity protection gun fitted with a 45–60 cm extension probe and spray nozzle. This ensures even distribution inside the cavity.
Apply a thicker layer to corners, edges and welded seams. Accessible areas can also be treated using a brush. The vehicle can be used immediately after application.
Drying time is approximately 2–3 hours at 20 °C.
Technical information:
- Base: wax and lanolin.
- Product type: one-component solvent-based treatment.
- Colour: brown, transparent.
- Density: 0.87 g/cm³.
- Drying at 20 °C: approximately 2–3 hours.
- Application temperature: from +15 °C to +30 °C.
- Capacity: 1 L.
- Product code: VKK-888.026-X01.
- EAN: 5906735801040.
Use in a well-ventilated area and wear appropriate personal protective equipment. Read the product label and Safety Data Sheet before use.
