GOLDCAR ML Transparent Anti-Corrosion Cavity Wax Spray 500 ml
| ID: | VKX-300.616-X01 |
| Manufacturer: | GOLDCAR |
Wax-based anti-corrosion spray for protecting enclosed vehicle cavities. Penetrates narrow gaps, displaces moisture and forms a flexible protective coating resistant to water, road salt and weather conditions.
GOLDCAR ML is a transparent wax-based anti-corrosion spray designed to protect enclosed vehicle cavities. The aerosol format enables easy application without a compressor or a dedicated spray gun.
The product penetrates narrow gaps, joints and seams, displaces water and moisture, and forms a flexible, sealed protective layer. Once dry, the coating provides effective resistance to corrosion, water, road salt, mild acids, mild alkalis and changing weather conditions.
It offers excellent adhesion and does not damage vehicle paintwork. Suitable for protecting the internal areas of doors, pillars, sills, bonnet, boot lid, chassis sections and other enclosed body cavities.
Key benefits:
- Protects enclosed cavities against corrosion
- Penetrates narrow gaps, joints and welded seams
- Displaces water and moisture
- Forms a flexible and sealed wax coating
- Resistant to water, road salt and weather conditions
- Does not damage vehicle paintwork
- Easy aerosol application
Directions for use:
The treated surface should be clean, dry, degreased and free from loose rust. Mask adjacent surfaces if necessary. Shake the aerosol thoroughly before use and spray the product into cavities through the available access holes. An extension tube or cavity probe can be used for hard-to-reach areas. Pay particular attention to corners, edges and welded seams. Drying time depends on the applied layer and environmental conditions.
Technical information:
- Base: high-quality waxes
- Colour: transparent with a brownish tint
- Application: aerosol
- Capacity: 500 ml
- Product code: VKX-300.616-X01
- EAN: 5906735808766
Safety information:
Use in a well-ventilated area. Keep away from heat, sparks, open flames and direct sunlight. Do not expose the aerosol container to temperatures above 50 °C.



