KRAUSS Telescopic Stand for Drying Guns
| ID: | 744110 |
| Manufacturer: | Krauss |
KRAUSS telescopic stand for drying guns is a professional height-adjustable stand designed for dry blowing and surface drying using Venturi-type drying guns. Suitable for drying paint, clear coat, primer, water-based coatings or moisture residues during painting, body repair and preparation work. Height adjustable from 20 to 210 cm, supplied with 2 x 5 m compressed air hoses and gun holders with 1/4" connection.
KRAUSS telescopic stand for drying guns is a professional height-adjustable stand designed for use with drying guns in painting, body repair, preparation and workshop applications.
This stand helps conveniently mount drying guns and direct the air flow to the required surface area. It is especially useful when drying paint, clear coat, primer, water-based coatings, cleaning residues, moisture or other surfaces that require a controlled air flow.
The telescopic construction allows the height to be adjusted from 20 to 210 cm, making the stand suitable for various tasks – from low body panels to higher surfaces. It is suitable for drying doors, wings, bumpers, sills, bonnet, roof or individual repair areas.
The stand is 89 cm wide and weighs 5.2 kg, providing stable use in workshops, paint areas or preparation zones. The set includes 2 x 5 m compressed air hoses and holders for drying guns with 1/4" connection.
KRAUSS telescopic stand allows more comfortable and efficient work, as drying guns can be fixed in the required position without the operator constantly holding them by hand. This helps save time, improves working comfort and allows the air flow to be directed more evenly onto the drying surface.
The product is suitable for spray booths, body repair workshops, service centres, preparation areas and professional automotive painting work where Venturi-type drying guns are used.
Technical data:
Manufacturer: KRAUSS TOOLS
Product type: telescopic stand for drying guns
Purpose: dry blowing and surface drying
Height adjustment: 20–210 cm
Width: 89 cm
Weight: 5.2 kg
Set includes: stand, compressed air hoses 2 x 5 m, gun holders
Connection: 1/4"
Product code: 744110
Suitable for: Venturi-type drying guns
Main features:
KRAUSS telescopic stand
Designed for drying guns
Suitable for dry blowing
Suitable for Venturi-type guns
Adjustable height 20–210 cm
Width 89 cm
Weight 5.2 kg
Includes 2 x 5 m compressed air hoses
Includes gun holders
1/4" connection
Helps conveniently direct air flow
Suitable for drying paint and clear coat
Suitable for drying primer
Suitable for water-based coatings
Suitable for body repair work
Suitable for spray booths and workshops
Allows work without constantly holding the guns by hand
Suitable for professional use
Use:
Place the stand in a stable position near the surface to be dried. Adjust the telescopic height according to the work area and surface position.
Attach the drying guns to the holders and connect the compressed air hoses. Before use, check that all connections are tight, the guns are securely held and the air flow is directed to the correct surface area.
During drying, adjust the stand height, gun position and air flow direction according to the work being performed. Do not use excessive pressure unless required by the coating or work process.
After work, disconnect the compressed air supply, remove the guns and store the stand in a clean, dry place.
Note:
Use only with compatible drying guns and suitable compressed air supply. Before use, make sure the stand is placed securely and the guns are safely fixed in the holders.
