FARECLA G3 PRO Deep Clean Clay Mitt – Polymer Decontamination Mitt
| ID: | 7191 |
FARECLA G3 PRO Deep Clean Clay Mitt is a reusable polymer mitt designed to remove bonded surface contamination. It effectively removes ingrained dirt, insect residue, small tar spots and dulling pollutants from paintwork, windscreens and headlights. A convenient alternative to a traditional clay bar.
FARECLA G3 PRO Deep Clean Clay Mitt is a reusable polymer decontamination mitt suitable for both professional detailers and car care enthusiasts. Its advanced rubber polymer technology helps remove contaminants that cannot be eliminated by regular vehicle washing.
The mitt effectively removes ingrained and bonded dirt, insect residue, small tar spots and other contaminants that reduce paint gloss. It can be used on automotive paintwork, windscreens and headlights.
After treatment, the surface becomes smooth and properly prepared for polishing, waxing, sealant or protective coating application.
The larger working area allows FARECLA G3 PRO Clay Mitt to treat vehicle surfaces faster than a traditional clay bar. It fits comfortably over the hand and does not require constant reshaping or kneading.
According to the manufacturer, a properly maintained mitt can last up to five times longer than a traditional clay bar. If the mitt is dropped on the ground, it does not need to be discarded – simply rinse it thoroughly with clean water.
Important: the mitt must always be used with a suitable lubricant. Never use it on a dry surface.
Main features:
• Advanced rubber polymer technology.
• Removes bonded surface contamination.
• Removes insect residue and small tar spots.
• Eliminates contaminants that reduce paint gloss.
• Suitable for paintwork, glass and headlights.
• Leaves the surface smooth and ready for polishing or protection.
• Faster and easier to use than a traditional clay bar.
• Reusable and easy to rinse clean.
• Can last up to five times longer than traditional clay.
• Suitable for professional and personal use.
Directions for use:
- Wash the surface thoroughly and remove all loose dirt.
- Lightly spray the polymer side of the mitt and the surface with a suitable lubricant. FARECLA G3 Pro Rapid Detailer or a car shampoo and water solution is recommended.
- Glide the polymer side of the mitt over the surface using light movements until the surface feels smooth.
- Keep both the mitt and the surface well lubricated throughout the process.
- Wipe the treated surface with the cloth side of the mitt or a clean microfibre cloth.
- After use, rinse accumulated contaminants from the polymer side with clean water.
Allow the mitt to dry naturally. It can be hung using the integrated side loop. Once completely dry, store it in a resealable plastic bag.
Never use the mitt dry or on an insufficiently lubricated surface. Test on an inconspicuous area before use.
Technical information:
Product type: reusable polymer clay mitt
Suitable surfaces: paintwork, glass and headlights
Lubricant required: yes
Product code: 7191
