AERO GUN BLACK Cleaning Gun Repair Kit
| ID: | TT06B1 |
| Manufacturer: | TONYIN |
AERO GUN BLACK Cleaning Gun Repair Kit is a spare internal assembly with bearings, thread, sealing ring and hose, designed to restore the operation of the AERO GUN BLACK cleaning gun. The kit is used when an important air flow / rotating cleaning assembly part becomes worn or damaged.
AERO GUN BLACK Cleaning Gun Repair Kit is a spare part designed for repairing the AERO GUN BLACK compressed air cleaning gun and restoring its proper operation.
This kit is used to replace the internal assembly of the cleaning gun when bearings, sealing elements, hose or other working parts become worn due to intensive use. A properly functioning assembly helps maintain stable air flow and effective dirt removal from hard-to-reach areas.
The repair kit is especially useful for cleaning guns used professionally in car washes, detailing centres, service centres or workshops. Instead of replacing the entire tool, the worn assembly can be replaced to extend the service life of the cleaning gun.
The kit includes a metal assembly with bearings, brass threaded fitting, sealing ring and black flexible hose. These parts are important for correct gun operation, stable air flow and convenient cleaning.
The repair kit is designed for the AERO GUN BLACK cleaning gun, which is used to blow out dust, debris, moisture and dirt from vehicle interiors, air vents, seat gaps, carpets, wheels and other hard-to-reach areas.
Main features:
Repair kit for cleaning gun
Designed for AERO GUN BLACK model
Spare internal assembly
With bearings
With brass threaded fitting
With sealing ring
With black hose
Helps restore proper gun operation
Suitable for replacing a worn part
Helps extend tool service life
Useful for professional use
Suitable for car washes
Suitable for detailing centres
Suitable for service centres and workshops
Designed for compressed air cleaning gun
Suitable for AERO GUN BLACK repair
Technical data:
Product type: repair kit / spare part
Purpose: cleaning gun repair
Suitable for model: AERO GUN BLACK
Kit parts: internal assembly, bearings, threaded fitting, sealing ring, hose
Attachment: threaded
Materials: metal, brass element, rubber sealing ring, plastic / rubber hose
Use: replacement of worn or damaged cleaning gun parts
Application: car washes, detailing centres, service centres, workshops, personal use
Use:
Before replacement, disconnect the cleaning gun from the compressed air supply. Make sure there is no pressure left in the tool.
Disassemble the cleaning gun according to its construction and remove the worn or damaged assembly. Install the new repair kit in the correct position and tighten the threaded parts securely.
After assembly, check that the sealing ring is installed correctly, that there is no air leakage and that the hose moves freely. Connect the gun to the air compressor and test its operation at lower pressure.
If the air flow is uneven, unusual noise is heard or the parts do not move correctly, check the tool again and make sure the kit is installed properly.
Note:
Before ordering, it is recommended to make sure that the repair kit is compatible with your cleaning gun. Do not use excessive force during installation to avoid damaging the thread, sealing ring or other small parts.
