Tonyin Adhesive & Film Residue Remover 473 ml
| ID: | TN16 |
| Manufacturer: | TONYIN |
Tonyin Adhesive & Film Residue Remover 473 ml is a cleaner for removing adhesive and film residues after window tint film, PPF protective film, vinyl film, glass stickers and other films have been removed. Suitable for automotive glass, household glass and other resistant surfaces where sticky residues need to be removed quickly.
Tonyin Adhesive & Film Residue Remover 473 ml is a special cleaner designed to remove adhesive, sticker and film residues from glass and other resistant surfaces.
This product is especially useful after removing window tint film, PPF protective film, vinyl wrap film, advertising stickers or glass stickers. After film removal, a sticky adhesive layer often remains on the surface and can be difficult to clean with ordinary cleaners. Tonyin Adhesive & Film Residue Remover helps soften and remove these residues faster.
The cleaner can be used for automotive glass, household windows, glass films and other suitable surfaces. It is a practical product for window tinting specialists, PPF and vinyl film installers, detailing centres, service centres, car washes and household use.
The product is suitable for removing old film adhesive residues, sticker marks, film edge residues and other sticky contamination. When used correctly, it helps reduce the need for mechanical rubbing and makes surface preparation easier before further cleaning or new film installation.
The manufacturer states that the product is made using non-hazardous solvents and non-toxic materials. However, as with all adhesive removers, it is recommended to test the product in a less visible area before use, especially if the surface is plastic, painted, tinted, sensitive or of unknown material.
The 473 ml size is convenient for both professional work and occasional cleaning tasks. The spray format allows the cleaner to be applied easily to the required area and helps control the amount used.
Main features:
Adhesive and film residue remover
Tonyin Adhesive & Film Residue Remover
Model TN16
Capacity 473 ml
Designed to remove adhesive residues
Suitable after window tint film removal
Suitable after PPF film removal
Suitable after vinyl film removal
Suitable for removing glass sticker residues
Suitable for automotive films
Suitable for household glass film residues
Helps remove sticky marks
Helps soften adhesive residues
Convenient before installing new film
Suitable for automotive glass
Suitable for glass and resistant surfaces
Suitable for detailing centres
Suitable for film installers
Suitable for service centres and car washes
Suitable for professional and household use
Technical data:
Manufacturer: Tonyin
Product name: Adhesive & Film Residue Remover
Model: TN16
Product type: adhesive and film residue remover
Capacity: 473 ml
Purpose: removing adhesive, film and sticker residues
Suitable for: window tint film, PPF, vinyl film, glass stickers
Surfaces: automotive glass, household glass and other resistant surfaces
Shelf life: 3 years
Use: professional and household
Use:
Before use, remove as much film or sticker material as possible mechanically. Only adhesive or sticky residue should remain on the surface.
Spray Tonyin Adhesive & Film Residue Remover directly onto the adhesive residue or onto a microfiber cloth. Allow the product to act briefly so the adhesive layer softens.
Wipe off the residue with a microfiber cloth, plastic scraper or another surface-safe tool. If the adhesive layer is thick or old, the process can be repeated.
After cleaning, wipe the surface again with a suitable glass cleaner or degreaser to remove any product residue before further work or new film installation.
Note:
Always test the product in a less visible area before use. Do not use on hot surfaces or in direct sunlight. Avoid contact with sensitive plastics, painted surfaces, rubber or materials of unknown composition unless their resistance has been confirmed by the manufacturer. Work in a well-ventilated area.
