QRS Spot Blender Clearcoat Blending Solvent 1 L

QRS Spot Blender is a professional blending solvent designed for local vehicle body repairs and clearcoat blending operations.

The product is applied to the transition zone between the existing and newly sprayed clearcoat. It softens the spray edge, smooths the blend and helps achieve a more uniform finish on the repaired surface.

QRS Spot Blender makes polishing the transition area easier and helps reduce the visible edge between the old and new clearcoat.

Benefits:

• designed for clearcoat blending;

• smooths the transition between old and new clearcoat;

• helps create an even, less visible blend;

• makes polishing the transition area easier;

• suitable for local vehicle body repairs;

• transparent;

• ready to use;

• applied with a spray gun.

Directions:

1. After applying the clearcoat, empty the spray gun cup but do not clean the gun.

2. Pour QRS Spot Blender into the cup and mix it with the remaining clearcoat.

3. Apply immediately after finishing the clearcoat application.

4. Spray 2–3 thin coats over the transition between the old and new clearcoat.

5. Once dry, polish the blending area if required.

Technical information:

• manufacturer: QRS;

• product type: clearcoat blending solvent;

• capacity: 1 L;

• colour: transparent;

• density: 0.9 g/cm³;

• mixing ratio: ready to use;

• recommended spray gun nozzle: 1.2–1.3 mm;

• working pressure: according to the spray gun manufacturer’s recommendations;

• shelf life: 12 months.

Important: this is not a conventional thinner for diluting clearcoat before application. It is intended specifically for blending the transition between old and new clearcoat.