TONYIN Platinum 10H Nano Ceramic Coating, 30 ml

TONYIN Platinum 10H Ceramic Coating is a professional nano ceramic coating designed for long-lasting protection of automotive paintwork and clear coat.

The high-concentration SiO2 formula creates a transparent, hard and exceptionally slick protective layer. It enhances paint gloss, colour depth and reflectivity, producing a pronounced wet-look finish.

Strong hydrophobic properties promote water beading and rapid run-off. Dirt and road grime have more difficulty adhering to the treated surface, making the vehicle easier to wash and maintain.

The coating helps improve the clear coat’s resistance to wash-induced micro-marring, light scratches, UV radiation and chemical environmental exposure. It acts as an additional sacrificial layer over the vehicle’s clear coat.

The 10H rating describes the manufacturer-stated hardness of the cured coating. It improves surface resistance but does not provide complete protection against deep scratches, stone chips or other mechanical damage.

Careful surface preparation is essential for the best results. Before application, wash and decontaminate the vehicle, polish the paintwork if necessary and degrease it with a suitable panel preparation product.

Main advantages:

Manufacturer-stated 10H hardness
High-concentration SiO2 formula
Creates a hydrophobic, water-repellent surface
Provides a deep wet-look gloss
Enhances paint colour and reflectivity
Helps reduce the adhesion of dirt and contamination
Makes vehicle washing and maintenance easier
Helps protect against UV and chemical exposure
Improves resistance to micro-marring and abrasion
Suitable for professional application

Directions for use:

Wash and completely dry the vehicle.
Remove tar, iron particles and other bonded contamination.
Polish the paintwork if necessary and remove all polishing residue.
Thoroughly degrease the surface.
Apply to a clean, dry and cool surface away from direct sunlight.
Place several drops of coating on the applicator and spread over a small area using cross-hatch movements.
When the coating begins to flash and a light rainbow effect appears, level it with a clean microfibre cloth.
Use a second clean cloth to buff the surface, leaving no excess product or streaks.
Keep the vehicle away from water for at least 24 hours after application. Always follow the application and safety instructions on the packaging.

Technical information:

Product type: professional nano ceramic coating
Technology: SiO2
Manufacturer-stated hardness: 10H
Application: protection of automotive paintwork and clear coat
Effect: hydrophobic protection, slickness and gloss
Model: TC01A3
Capacity: 30 ml