Hardener for polyester body filler, 40 g

This hardener is designed for use with compatible two-component polyester body fillers used in automotive body repair and surface preparation.

When mixed with the filler, the hardener initiates the chemical curing process. This allows the filler to harden within the specified time and become ready for sanding and further surface treatment.

Application:

Mix the required amount of filler with the quantity of hardener specified by the filler manufacturer. Mix thoroughly until a completely uniform colour is achieved. Apply the prepared mixture immediately, as its working time is limited after adding the hardener.

Do not exceed the mixing ratio specified by the filler manufacturer. Adding too much hardener may shorten the working time and negatively affect the final result.

Technical information:

Product type: polyester body filler hardener
Application: two-component polyester body fillers
Weight: 40 g
Intended use: automotive body repair and surface preparation
Mixing ratio: according to the filler manufacturer’s instructions
Packaging: tube

Protective gloves and eye protection are recommended during use. Store tightly closed in a cool, dry place, away from heat sources and direct sunlight.